home *** CD-ROM | disk | FTP | other *** search
- Airplanes: Hold 'Q' down momentarily to increase throttle
- until tail is off the ground. Apply more throttle then
- press 'M' momemtarily (for up elevator). Decrease throttle
- slightly by holding down 'Z' momentarily (cruising speed).
- Operate rudder by pressing 'C' and 'V'. The Trainer is
- rudder controlled only. For planes equipped with ailerons
- - use 'H' and 'K' keys to control heading.
-
- Helicopters: Hold 'Q' down until throttle is at near-
- maximum then carefully press 'W' for up or 'X' for down
- (collective control). Use keys 'U' and 'M' to control pitch
- and keys 'H' and 'K' for roll (as above) and control
- direction (yaw) with rudder keys 'C' and 'V'.
-
- Note:Press F12 to reset after a crash. Use keys
- F4-F11 to change view. To control simulator speed (for
- beginners), set Time Factor in Timing and Calculations in
- Scene Quick Edit to 2.0-3.0.
-